|T/C's, Pt-100 RTD, or linear as per order
|0.25% of full scale +-1 count throughout the range
|4 digits 0.56" red led for PV and 2 digits 0.56" red led for CH. No.
|50 Degree C and humidity up to 95% non-condensing
|Open Input Protection
|Upscale with relay turns off
|By zero & span adjustment by software from front panel keyboard
|General-purpose MS powder-coated
|By four keys on front panel index, increment, decrement, and enter
|Less than 10Va
|96x96 mm din size (bezel)
The instrument is made in 96 x 96 mm size with a standard cutout. The front is a sealed membrane type to withstand a dusty environment. The programming, calibration, and operation of the instrument are by four simple keys with two independent displays for channel no. And process variable. The operation of the instrument is menu-driven with user under-friendly prompts.
The product is made to accept the various types of input as per order. The calibration of the unit is done without trim pots. The unit can be calibrated in the installed condition itself by front panel keys at any given point for channel 1 i.e. user need not feed a fixed signal. This calibration is valid for all channels. Inputs are linearized for 0.25¬curacy throughout the range.
- RS – 485 Modbus RTU protocol, printer output with real-time clock.